Display Logfile Buffer - H3C S5120-SI Series Command Reference Manual

Default Level
1: Monitor level
Parameters
level severity: Displays the summary of the log buffer, where severity represents information level, in
the range 0 to 7.
Description
Use the display logbuffer summary command to display the summary of the log buffer.
Examples
# Display the summary of the log buffer.
<Sysname> display logbuffer summary
EMERG ALERT CRIT ERROR
0 0
Table 1-6 display logbuffer summary command output description
Field
EMERG
ALERT
CRIT
ERROR
WARN
NOTIF
INFO
DEBUG

display logfile buffer

Syntax
display logfile buffer [ | { begin | exclude | include } regular-expression ]
View
Any view
Default Level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see CLI in the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
WARN NOTIF
0 0 22 0
Represents emergency, refer to
Represents alert, refer to
Represents critical, refer to
Represents error, refer to
Represents warning, refer to
Represents notice, refer to
Represents informational, refer to
Represents debug, refer to
INFO DEBUG
1 0
Description
Table 1-4
Table 1-4
Table 1-4
Table 1-4
Table 1-4
1-7
Table 1-4 for details
for details
for details
for details
Table 1-4 for details
for details
Table 1-4 for details
for details