Display Nandflash Badblock-Location - H3C S5120-SI Series Command Reference Manual

Description
Use the display nandflash file-location command to display the location of the specified file in the
NAND flash memory.
The displayed information includes all the physical pages corresponding to the logical pages of the
specified file.
Examples
# Display the location of the file test.cfg in the NAND flash memory.
<Sysname> display nandflash file-location test.cfg
Logical Chunk
---------------------------
chunk(0)
chunk(1)
chunk(2)
filename: test.cfg
Table 1-2 display nandflash file-location command output description
Field
Logic Chunk
Physical Page
chunk(0) 1234

display nandflash badblock-location

Syntax
display nandflash badblock-location
View
Any view
Default Level
2: System level
Parameters
None
Description
Use the display nandflash badblock-location command to display the number and location of bad
blocks in the NAND flash memory.
Examples
# Display the number and location of bad blocks in the NAND flash memory.
<Sysname> display nandflash badblock-location
Physical Page
1234
1236
1235
Serial number of the logical pages
Serial number of the physical pages
The first logical page of this file corresponds to the 1234th
physical page on the device.
Description
1-5