Display Stp Root - H3C S5120-SI Series Command Reference Manual

Parameters
None
Description
Use the display stp region-configuration command to view the currently effective configuration
information of the MST region, including the region name, revision level, and user-configured
VLAN-to-instance mappings.
Related commands: instance, region-name, revision-level, vlan-mapping modulo.
Examples
# View the currently effective MST region configuration information.
<Sysname> display stp region-configuration
Oper Configuration
Format selector
Region name
Revision level
Configuration digest :0x5f762d9a46311effb7a488a3267fca9f
Instance
0
1
2
Table 1-8 display stp region-configuration command output description
Field
Format selector
Region name
Revision level
Instance Vlans Mapped

display stp root

Syntax
display stp root
View
Any view
Default Level
1: Monitor level
Parameters
None
:0
:hello
:0
Vlans Mapped
21 to 4094
1 to 10
11 to 20
MSTP-defined format selector, which defaults to 0 and is not
configurable
MST region name
Revision level of the MST region, which can be configured using the
revision-level command and defaults to 0.
VLAN-to-instance mappings in the MST region
Description
1-12