Ntdp Configuration Commands; Display Ntdp - H3C S5120-SI Series Command Reference Manual

NTDP Configuration Commands

display ntdp

Syntax
display ntdp
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display ntdp command to display NTDP configuration information.
Examples
# Display NTDP configuration information.
<Sysname> display ntdp
NTDP is running.
Hops : 4
Timer : 1 min
Hop Delay : 100 ms
Port Delay: 10 ms
Last collection total time: 92ms
Table 1-2 display ntdp command output description
Field
NTDP is running
Hops
Timer
disable
Hop Delay
Port Delay
Last collection total time
NTDP is enabled globally on the local device.
Hop count for topology collection
Interval to collect topology information (after the cluster is
created)
Indicates the device is not a management device and unable to
perform periodical topology collection
Delay time for the device to forward topology collection
requests
Delay time for a topology-collection request to be forwarded
through a port
Time cost during the last collection
1-7
Description