Cluster-Snmp-Agent Usm-User V3 - H3C S5120-SI Series Command Reference Manual

The MIB view will be retained if a cluster is dismissed or a member device is deleted from the
whitelist.
If the same view name as the current one has been configured on a member device, the current
view will replace the original one on the member device.
Examples
# Create a view including all objects of mib2.
<aaa_0.Sysname> system-view
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster] cluster-snmp-agent mib-view included mib2 1.3.6.1.2.1

cluster-snmp-agent usm-user v3

Syntax
cluster-snmp-agent usm-user v3 user-name group-name [ authentication-mode { md5 | sha }
auth-password ] [ privacy-mode des56 priv-password ]
undo cluster-snmp-agent usm-user v3 user-name group-name
View
Cluster view
Default Level
1: Monitor level
Parameters
user-name: User name, which is a string of 1 to 32 characters.
group-name: Group name, which is a string of 1 to 32 characters.
authentication-mode: Specifies the security level to be authentication needed.
md5: Specifies the authentication protocol to be HMAC-MD5-96.
sha: Specifies the authentication protocol to be HMAC-SHA-96.
auth-password: Authentication password, which is a string of 1 to 16 characters if in plain text; it can
only be a string of 24 characters if in cipher text.
privacy-mode: Specifies the security level to be encrypted.
des56: Specifies the encryption protocol to be DES (data encryption standard).
priv-password: Encryption password, which is a string of 1 to 16 characters in plain text; it can only be a
string of 24 characters in cipher text.
Description
Use the cluster-snmp-agent usm-user v3 command to add a new user to the SNMP v3 group shared
by a cluster.
Use the undo cluster-snmp-agent usm-user v3 command to delete the SNMP v3 group user shared
by the cluster.
Note that:
1-27