Arp Anti-Attack Source-Mac Exclude-Mac - H3C S5120-SI Series Command Reference Manual

undo arp anti-attack source-mac aging-time
View
System view
Default Level
2: System level
Parameters
time: Aging timer for protected MAC addresses, in the range of 60 to 6000 seconds.
Description
Use the arp anti-attack source-mac aging-time command to configure the aging timer for protected
MAC addresses.
Use the undo arp anti-attack source-mac aging-time command to restore the default.
By default, the aging timer for protected MAC addresses is 300 seconds (five minutes).
Examples
# Configure the aging timer for protected MAC addresses as 60 seconds.
<Sysname> system-view
[Sysname] arp anti-attack source-mac aging-time 60

arp anti-attack source-mac exclude-mac

Syntax
arp anti-attack source-mac exclude-mac mac-address&<1-10>
undo arp anti-attack source-mac exclude-mac [ mac-address&<1-10> ]
View
System view
Default Level
2: System level
Parameters
mac-address&<1-10>: MAC address list. The mac-address argument indicates a protected MAC
address in the format H-H-H. &<1-10> indicates the number of protected MAC addresses that you can
configure.
Description
Use the arp anti-attack source-mac exclude-mac command to configure protected MAC addresses
which will be excluded from ARP packet detection.
Use the undo arp anti-attack source-mac exclude-mac command to remove the configured
protected MAC addresses.
By default, no protected MAC address is configured.
2-3