Lldp Compliance Cdp; Lldp Enable - H3C S5120-SI Series Command Reference Manual

lldp compliance cdp

Syntax
lldp compliance cdp
undo lldp compliance cdp
View
System view
Default Level
2: System level
Parameters
None
Description
Use the lldp compliance cdp command to enable CDP compatibility globally.
Use the undo lldp compliance cdp command to restore the default.
By default, CDP compatibility is disabled globally.
Note that, as the maximum TTL allowed by CDP is 255 seconds, your TTL configuration, namely, the
product of the TTL multiplier and the LLDPDU transmit interval, must be no more than 255 seconds for
CDP-compatible LLDP to work properly with Cisco IP phones.
Related commands: lldp hold-multiplier, lldp timer tx-interval.
Examples
# Enable LLDP to be compatible with CDP globally.
<Sysname> system-view
[Sysname] lldp compliance cdp

lldp enable

Syntax
lldp enable
undo lldp enable
View
System view, Layer 2 Ethernet port view, port group view
Default level
2: System level
Parameters
None
1-16