Cluster; Cluster Enable - H3C S5120-SI Series Command Reference Manual

Restore topology from local flash file,for there is no base topology.
(Please confirm in 30 seconds, default No). (Y/N)
Y
Begin get base topology file from local flash......
Get file error, can not finish base topology recover
#Sep 18 19:56:03:804 2006 Sysname IFNET/4/INTERFACE UPDOWN:
Trap 1.3.6.1.6.3.1.1.5.4: Interface 3276899 is Up, ifAdminStatus is 1, ifOperSt
atus is 1
#Sep 18 19:56:03:804 2006 Sysname CLST/4/Cluster_Trap:
OID:1.3.6.1.4.1.2011.6.7.1.0.3: member 0.0.0.0.0.224.252.0.29.0 role change, NTD
PIndex:0.0.0.0.0.0.224.252.0.29.0, Role:1
%Sep 18 19:56:03:804 2006 Sysname IFNET/4/UPDOWN:
Line protocol on the interface Vlan-interface100 is UP
[aaa_0.Sysname-cluster]
%Sep 18 19:56:18:782 2006 Sysname CLST/4/LOG:
Member 00e0-fc00-1e00 is joined in cluster aaa.
[aaa_0.Sysname-cluster]

cluster

Syntax
cluster
View
System view
Default Level
2: System level
Parameters
None
Description
Use the cluster command to enter cluster view.
Examples
# Enter cluster view
<Sysname> system-view
[Sysname] cluster
[Sysname-cluster]

cluster enable

Syntax
cluster enable
undo cluster enable
1-20