Display Cluster Current-Topology - H3C S5120-SI Series Command Reference Manual

Device : S5120
IP : 31.31.31.56/24
Table 1-8 display cluster candidates command output description
Hostname
MAC
Hop
IP
Device

display cluster current-topology

Syntax
display cluster current-topology [ mac-address mac-address [ to-mac-address mac-address ] |
member-id member-number [ to-member-id member-number ] ]
View
Any view
Default Level
2: System level
Parameters
member-number: Number of the devices in a cluster (including the management device and member
devices).
mac-address: MAC addresses of the devices in a cluster (including the management device and
member devices).
Description
Use the display cluster current-topology command to display the current topology information of the
cluster.
Note that:
If you specify both the mac-address mac-address and to-mac-address mac-address arguments,
the topology information of the devices that are in a cluster and form the connection between two
specified devices is displayed.
If you specify both the member-id member-number and to-member-id member-number
arguments, the topology information of the devices that are in a cluster and form the connection
between two specified devices is displayed.
If you specify only the mac-address mac-address or member-id member-number argument, the
topology information of all the devices in a cluster is displayed, with a specified device as the root
node.
This command can be executed on the management device only.
Field
System name of a candidate device
MAC address of a candidate device
Hops from a candidate device to the management device
IP address of a candidate device
Product model of a candidate device
Description
1-34