Snmp-Agent - H3C S5120-SI Series Command Reference Manual

Default Level
2: System level
Parameters
None
Description
Use the enable snmp trap updown command to enable the trap function for interface state changes.
Use the undo enable snmp trap updown command to disable the trap function for interface state
changes.
By default, the trap function for interface state changes is enabled.
Note that:
To enable an interface to generate linkUp/linkDown traps when its state changes, you need to enable
the linkUp/linkDown trap function on the interface and globally. Use the enable snmp trap updown
command to enable this function on an interface, and use the snmp-agent trap enable [ standard
[ linkdown | linkup ] * ] command to enable this function globally.
Related commands: snmp-agent target-host, snmp-agent trap enable.
Examples
# Enable the sending of linkUp/linkDown SNMP traps on port GigabitEthernet 1/0/1 and use the
community name public.
<Sysname> system-view
[Sysname] snmp-agent trap enable
[Sysname] snmp-agent target-host trap address udp-domain 10.1.1.1 params securityname public
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] enable snmp trap updown

snmp-agent

Syntax
snmp-agent
undo snmp-agent
View
System view
Default Level
3: Manage level
Parameters
None
Description
Use the snmp-agent command to enable SNMP agent.
Use the undo snmp-agent command to disable SNMP agent.
1-11