H3C S5120-SI Series Command Reference Manual page 313

View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display ftp client configuration command to display the configuration information of the FTP
client.
Currently this command displays the configured source IP address or source interface of the FTP client.
Related commands: ftp client source.
Examples
# Display the current configuration information of the FTP client.
<Sysname> display ftp client configuration
The source IP address is 192.168.0.123
ftp
Syntax
ftp [ server-address [ service-port ] [ source { interface interface-type interface-number | ip
source-ip-address } ] ]
View
User view
Default Level
3: Manage level
Parameters
server-address: IP address or host name (a string of 1 to 20 characters) of a remote FTP server.
service-port: TCP port number of the remote FTP server, in the range 0 to 65535. The default value is
21.
interface interface-type interface-number: Specifies the source interface by its type and number. The
primary IP address configured on this interface is the source address of the transmitted packets. If no
primary IP address is configured on the source interface, the connection fails.
1-14