Verbose - H3C S5120-SI Series Command Reference Manual

Description
Use the user command to relog in to the currently accessed FTP server with another username.
Before using this command, you must configure the corresponding username and password on the FTP
server; otherwise, your login fails and the FTP connection is closed.
Examples
# User ftp1 has logged in to the FTP server. Use username ftp2 to log in to the current FTP server.
(Suppose username ftp2 and password 123123123123 have been configured on the FTP server).
Method 1
[ftp] user ftp2
331 Password required for ftp2.
Password:
230 User logged in.
[ftp]
Method 2
[ftp] user ftp2 123123123123
331 Password required for ftp.
230 User logged in.
[ftp]

verbose

Syntax
verbose
undo verbose
View
FTP client view
Default Level
3: Manage level
Parameters
None
Description
Use the verbose command to enable the protocol information function to display detailed prompt
information.
Use the undo verbose command to disable the protocol information function.
By default, the protocol information function is enabled.
Examples
# Enable the protocol information function.
1-26