Storm-Constrain Interval; Unicast-Suppression - H3C S5120-SI Series Command Reference Manual

storm-constrain interval

Syntax
storm-constrain interval seconds
undo storm-constrain interval
View
System view
Default Level
2: System level
Parameters
seconds: Interval for generating traffic statistics, in the range 1 to 300 (in seconds).
Description
Use the storm-constrain interval command to set the interval for generating traffic statistics.
Use the undo storm-constrain interval command to restore the default.
By default, the interval for generating traffic statistics is 10 seconds.
The interval set by the storm-constrain interval command is specifically for the storm constrain
function. It is different form that set by the flow-interval command.
For network stability consideration, configure the interval for generating traffic statistics to a value
that is not shorter than the default.
Examples
# Set the interval for generating traffic statistics to 60 seconds.
<Sysname> system-view
[Sysname] storm-constrain interval 60

unicast-suppression

Syntax
unicast-suppression { ratio | pps max-pps | kbps max-bps }
undo unicast-suppression
View
Ethernet port view, port group view
Default Level
2: System level
1-31