Lldp Configuration Commands; Display Lldp Local-Information - H3C S5120-SI Series Command Reference Manual

1

LLDP Configuration Commands

LLDP Configuration Commands

display lldp local-information

Syntax
display lldp local-information [ global | interface interface-type interface-number ]
View
Any view
Default level
1: Monitor level
Parameters
global: Displays the global LLDP information to be sent.
interface interface-type interface-number: Displays the LLDP information to be sent out the port
specified by its type and number.
Description
Use the display lldp local-information command to display the LLDP information to be sent, which will
be contained in the LLDP TLVs and sent to neighbor devices.
If no keyword or argument is specified, this command displays all the LLDP information to be sent,
including the global LLDP information and the LLDP information about the LLDP-enabled ports in the up
state.
Examples
# Display all the LLDP information to be sent.
<Sysname> display lldp local-information
Global LLDP local-information:
Chassis ID
System name
System description : System
System capabilities supported : Bridge,Router
System capabilities enabled
MED information
Device class: Connectivity device
HardwareRev
FirmwareRev
: 00e0-fc00-5600
: Sysname
: Bridge,Router
: REV.A
: 109
1-1