H3C S5120-SI Series Command Reference Manual page 342

Default Level
1: Monitor level
Parameters
None
Description
Use the display ip routing-table statistics command to display the route statistics of the network
routing table.
Examples
# Display route statistics in the routing table.
<Sysname> display ip routing-table statistics
Proto route
DIRECT 24
STATIC 4
Total 28
Table 1-3 display ip routing-table statistics command output description
Field
Proto
route
active
added
deleted
freed
Total
reset ip routing-table statistics protocol
Syntax
reset ip routing-table statistics protocol { protocol | all }
View
User view
Default Level
2: System level
Parameters
protocol: Clears statistics for the IPv4 routing protocol, which can be direct or static.
all: Clears statistics for all IPv4 routing protocols.
active added
4 25
1 4
5 29
Origin of the routes.
Number of routes from the origin
Number of active routes from the origin
Number of routes added into the routing table since the router started up or the
routing table was last cleared
Number of routes marked as deleted, which will be freed after a period.
Number of routes that got freed, that is, got removed permanently.
Total number
deleted
1
0
1
Description
1-11
freed
0
0
0