H3C S5120-SI Series Command Reference Manual page 864

Default Level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Description
Use the display poe interface power command to display the power information of a PoE
interface(s).
If no interface is specified, the power information of all PoE interfaces will be displayed.
Examples
# Display the power information of GigabitEthernet 1/0/1.
<Sysname> display poe interface power gigabitethernet 1/0/1
Interface CurPower PeakPower MaxPower PD Description
(W)
GE1/0/1 15.0
# Display the power information of all PoE interfaces.
<Sysname> display poe interface power
Interface CurPower PeakPower MaxPower PD Description
(W)
GE1/0/25 4.4
GE1/0/26 4.4
GE1/0/27 15.0
GE1/0/28 0.0
GE1/0/29 0.0
GE1/0/30 0.0
--- 3 port(s) on,
Table 1-4 display poe interface power command output description
Interface
CurPower
PeakPower
MaxPower
PD Description
port(s) on
consumed
Remaining
(W) (W)
15.3 15.4
(W) (W)
4.5 4.6
4.5 15.4
15.3 15.4
0.0 0.0
0.0 0.0
0.0 0.0
23.8(W) consumed,
Field
Acess Point on Room 509 for Pete r
IP Phone on Room 309 for Peter Smith
IP Phone on Room 409 for Peter Pan
Acess Point on Room 509 for Peter
IP Phone on Room 609 for Peter John....
IP Phone on Room 709 for Jack
IP Phone on Room 809 for Alien
356.2(W) Remaining ---
Shortened form of a PoE interface
Current power of a PoE interface
Peak power of a PoE interface
Maximum power of a PoE interface
Description of the PD connected with a PoE
interface When the description contains more
than 34 characters, the first 30 characters
followed by four dots are displayed.
Number of PoE interfaces that are supplying
power
Power currently consumed by all PoE interfaces
Total remaining power of the system
1-7
Description