Display Device Manuinfo - H3C S5120-SI Series Command Reference Manual

View
Any view
Default Level
2: System level
Parameters
verbose: Displays detailed information.
Description
Use the display device command to display information about the device.
Examples
# Display information of the device. (The output of this command varies with devices.)
<Sysname> display device
SubSNo PortNum PCBVer
0 52
Table 1-3 display device command output description
Field
SubSNo
PortNum
AddrLM
Brd Status

display device manuinfo

Syntax
display device manuinfo
View
Any view
Default Level
3: Manage level
Parameters
None
Description
Use the display device manuinfo command to display electrical label information about the device.
FPGAVer CPLDVer BootRomVer AddrLM Type
Ver.B NULL 001
Number of the slot in which the subcard resides
Maximum number of ports that a subcard supports
Address learning mode
Card status, which can be the following values:
Absent: No card is in the slot.
Fault: Error occurred, and the card cannot start normally.
Normal: The card is an interface card and functions
normally.
119 IVL LS51LTSS
Description
1-8
State
Normal