Port Priority Configuration Commands - H3C S5120-SI Series Command Reference Manual

View
System view
Default Level
2: System level
Parameters
dot1p-dot1p: 802.1p-precedence-to-802.1p-precedence mapping table.
dot1p-dscp: 802.1p-precedence-to-DSCP mapping table.
dot1p-lp: 802.1p-precedence-to-local-precedence mapping table.
dscp-dot1p: DSCP-to-802.1p-precedence mapping table.
dscp-dscp: DSCP-to-DSCP mapping table.
dscp-lp: DSCP-to-local-precedence mapping table.
Description
Use the qos map-table command to enter the specified priority mapping table view.
Related commands: display qos map-table.
Examples
# Enter the inbound 802.1p-precedence-to-local-precedence mapping table view.
<Sysname> system-view
[Sysname] qos map-table dot1p-lp
[Sysname-maptbl-dot1p-lp]

Port Priority Configuration Commands

qos priority
Syntax
qos priority priority-value
undo qos priority
View
Interface view, port group view
Default Level
2: System level
Parameters
priority-value: Port priority value, which defaults to 0 and ranges from 0 to 7.
Description
Use the qos priority command to configure a priority for the current port.
Use the undo qos priority command to restore the default value.
2-3