Authentication Default - H3C S5120-SI Series Command Reference Manual

View
ISP domain view
Default Level
2: System level
Parameters
None
Description
Use the accounting optional command to enable the accounting optional feature.
Use the undo accounting optional command to disable the feature.
By default, the feature is disabled.
Note that with the accounting optional command configured for a domain:
A user that will be disconnected otherwise can use the network resources even when there is no
accounting server available or communication with the current accounting server fails. This
command applies to scenarios where authentication is required but accounting is not.
If accounting for a user in the domain fails, the device will not send real-time accounting updates for
the user any more.
The limit on the number of local user connections configured by using the access-limit command
in local user view is not effective.
Examples
# Enable the accounting optional feature for users in domain test.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting optional

authentication default

Syntax
authentication default { local | none | radius-scheme radius-scheme-name [ local ] }
undo authentication default
View
ISP domain view
Default Level
2: System level
Parameters
local: Performs local authentication.
none: Does not perform any authentication.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which is a string of 1
to 32 characters.
1-6