H3C S5120-SI Series Command Reference Manual page 625

Field
reference clock ID
local mode
local poll
peer mode
peer poll
offset
delay
disper
root delay
root disper
reach
sync dist
Reference clock ID of the clock source
1) If the reference clock is the local clock, the value of this
field is related to the stratum level of the clock source:
When the stratum level of the clock source is 0 or 1, this
field will be "LOCL";
When the stratum level of the clock source has another
value, this field will be the IP address of the local clock.
2) If the reference clock is the clock of another device on
the network, the value of this field will be the IP address
of that device.
Operation mode of the local device, including
unspec: The mode is unspecified.
active: Active mode.
passive: Passive mode.
client: Client mode.
server: Server mode.
bdcast: Broadcast server mode.
control: Control query mode.
private: Private message mode.
Poll interval of the local device, in seconds. The value
displayed is a power of 2, for example, if the displayed value
is 6, it indicates that the poll interval of the local device is 2
that is, 64 seconds.
Operation mode of the peer device, including
unspec: The mode is unspecified.
active: Active mode.
passive: Passive mode.
client: Client mode.
server: Server mode.
bdcast: Broadcast server mode.
control: Control query mode.
private: Private message mode.
Poll interval of the peer device, in seconds. The value
displayed is a power of 2, for example, if the displayed value
is 6, it indicates that the poll interval of the local device is 2
that is, 64 seconds.
The offset of the system clock relative to the reference clock,
in milliseconds
The roundtrip delay from the local device to the clock source,
in milliseconds
The maximum error of the system clock relative to the
reference clock
The roundtrip delay from the local device to the primary
reference source, in milliseconds
The maximum error of the system clock relative to the
primary reference clock, in milliseconds
Reachability count of the clock source. 0 indicates that the
clock source is unreachable.
The synchronization distance relative to the upper-level
clock, in seconds, and calculated from dispersion and
roundtrip delay values.
1-4
Description
6
,
6
,