Check Region-Configuration - H3C S5120-SI Series Command Reference Manual

check region-configuration

Syntax
check region-configuration
View
MST region view
Default Level
2: System level
Parameters
None
Description
Use the check region-configuration command to view MST region pre-configuration information,
including the region name, revision level, and VLAN-to-instance mapping settings.
Note that:
Two or more MSTP-enabled devices belong to the same MST region only if they are configured to
have the same format selector, MST region name, the same VLAN-to-instance mapping entries in
the MST region and the same MST region revision level, and they are interconnected via a physical
link.
Before activating the configurations of an MST region, you are recommended to use this command
to check whether the MST region pre-configurations are correct. You should activate the MST
region pre-configurations only if the result returns positive.
Related commands: instance, region-name, revision-level, vlan-mapping modulo, active
region-configuration.
Examples
# View MST region pre-configurations.
<Sysname> system-view
[Sysname] stp region-configuration
[Sysname-mst-region] check region-configuration
Admin Configuration
Format selector
Region name
Revision level
Configuration digest :0x41b5018aca57daa8dcfdba2984d99d06
Instance
0
1
:0
:000fe26a58ed
:0
Vlans Mapped
1 to 9, 11 to 4094
10
1-2