H3C S5120-SI Series Command Reference Manual page 583

Parameters
logging
reflective
fragment
time-range
time-range-name
If you provide the precedence or tos keyword in addition to the dscp keyword, the dscp keyword takes
effect.
Setting the protocol argument to tcp or udp, you may define the parameters shown in
Table 1-5 TCP/UDP-specific parameters for advanced ACL rules
Parameters
source-port operator
port1 [ port2 ]
destination-port
operator port1 [ port2 ]
Function
Specifies to log matched
packets.
Specifies that the rule be
reflective.
Indicates that the rule
applies to only non-first
fragments.
Specifies a time range for
the rule.
Function
Specifies one or more
UDP or TCP source
ports.
Specifies one or more
UDP or TCP
destination ports.
1-10
Description
This function requires that the module
using the ACL support logging.
Not supported.
Without this keyword, the rule applies to all
fragments and non-fragments.
The time-range-name argument takes a
case insensitive string of 1 to 32
characters. It must start with an English
letter.
Description
The operator argument can be lt (lower than), gt
(greater than), eq (equal to), neq (not equal to),
or range (inclusive range).
The port1 and port2 arguments are TCP or UDP
port numbers in the range 0 to 65535. port2 is
needed only when the operator argument is
range.
TCP port numbers can be represented in these
words: chargen (19), bgp (179), cmd (514),
daytime (13), discard (9), domain (53), echo
(7), exec (512), finger (79), ftp (21), ftp-data
(20), gopher (70), hostname (101), irc (194),
klogin (543), kshell (544), login (513), lpd
(515), nntp (119), pop2 (109), pop3 (110), smtp
(25), sunrpc (111), tacacs (49), talk (517),
telnet (23), time (37), uucp (540), whois (43),
and www (80).
UDP port numbers can be represented in these
words: biff (512), bootpc (68), bootps (67),
discard (9), dns (53), dnsix (90), echo (7),
mobilip-ag (434), mobilip-mn (435),
nameserver (42), netbios-dgm (138),
netbios-ns (137), netbios-ssn (139), ntp (123),
rip (520), snmp (161), snmptrap (162), sunrpc
(111), syslog (514), tacacs-ds (65), talk (517),
tftp (69), time (37), who (513), and xdmcp
(177).
Table 1-5.