Vlan Configuration Commands; Description - H3C S5120-SI Series Command Reference Manual

Hide thumbs Also See for S5120-SI Series:

Table of Contents

VLAN Configuration Commands

description text

undo description

VLAN view, VLAN interface view

Default Level

2: System level

text: Description of a VLAN or VLAN interface. Currently, the device supports the following types of

characters or symbols: standard English characters (numbers and case-sensitive letters), special

English characters, spaces, and other characters or symbols that conform to the Unicode standard.

For a VLAN, the description string contains 1 to 32 characters.

For a VLAN interface, the description string contains 1 to 80 characters.

A port description can be the mixture of English characters and other Unicode characters. The

mixed description cannot exceed the specified length.

To use a type of Unicode characters or symbols in a port description, you need to install the

corresponding Input Method Editor (IME) and log in to the device through remote login software

that supports this character type.

Each Unicode character or symbol (non-English characters) takes the space of two regular

characters. When the length of a description string reaches or exceeds the maximum line width on

the terminal software, the software starts a new line, possibly breaking a Unicode character into

two parts. As a result, garbled characters may be displayed at the end of a line.

Case-sensitive string that describes the current VLAN or VLAN interface. Spaces can be included in the

description.

For a VLAN, this is a string of 1 to 32 characters.

For a VLAN interface, this is a string of 1 to 80 characters.

Table of Contents