H3C S5120-SI Series Command Reference Manual page 341

Description
Use the display ip routing-table protocol command to display routing information of a specified
routing protocol.
Examples
# Display brief information about direct routes.
<Sysname> display ip routing-table protocol direct
Public Routing Table : Direct
Summary Count : 6
Direct Routing table Status : < Active>
Summary Count :
Destination/Mask
2.2.2.0/24
2.2.2.2/32
127.0.0.0/8
127.0.0.1/32
192.168.80.0/24
192.168.80.10/32
Direct Routing table Status : < Inactive>
Summary Count : 0
# Display brief information about static routes.
<Sysname> display ip routing-table protocol static
Public Routing Table : Static
Summary Count : 2
Static Routing table Status : < Active>
Summary Count :
Static Routing table Status : < Inactive>
Summary Count : 2
Destination/Mask
1.2.3.0/24
3.0.0.0/8
For detailed description of the above output, see
display ip routing-table statistics
Syntax
display ip routing-table statistics
View
Any view
6
Proto Pre Cost
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
0
Proto Pre Cost
Static 60 0
Static 60 0
NextHop Interface
2.2.2.1 Vlan2
127.0.0.1 InLoop0
127.0.0.1 InLoop0
127.0.0.1
192.168.80.10 Vlan1
127.0.0.1 InLoop0
NextHop Interface
1.2.4.5 Vlan10
2.2.2.2 Vlan1
Table 1-1.
1-10
InLoop0