Pki Certificate Access-Control-Policy; Pki Certificate Attribute-Group - H3C S5120-SI Series Command Reference Manual

pki certificate access-control-policy

Syntax
pki certificate access-control-policy policy-name
undo pki certificate access-control-policy { policy-name | all }
View
System view
Default Level
2: System level
Parameters
policy-name: Name of the certificate attribute-based access control policy, a case-insensitive string of 1
to 16 characters. It cannot be "a", "al" or "all".
all: Specifies all certificate attribute-based access control policies.
Description
Use the pki certificate access-control-policy command to create a certificate attribute-based access
control policy and enter its view.
Use the undo pki certificate access-control-policy command to remove a specified or all certificate
attribute-based access control policies.
No access control policy exists by default.
Examples
# Configure an access control policy named mypolicy and enter its view.
<Sysname> system-view
[Sysname] pki certificate access-control-policy mypolicy
[Sysname-pki-cert-acp-mypolicy]

pki certificate attribute-group

Syntax
pki certificate attribute-group group-name
undo pki certificate attribute-group { group-name | all }
View
System view
Default Level
2: System level
Parameters
group-name: Name for the certificate attribute group, a case-insensitive string of 1 to 16 characters. It
cannot be "a", "al" or "all".
1-18