Before configuring this command in a VLAN, enable IGMP snooping in the VLAN.
Related commands: igmp-snooping enable.
Examples
# Enable IGMP Snooping and then IGMP Snooping Proxying in VLAN 2.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping proxying enable
igmp-snooping querier
Syntax
igmp-snooping querier
undo igmp-snooping querier
View
VLAN view
Default Level
2: System level
Parameters
None
Description
Use the igmp-snooping querier command to enable the IGMP snooping querier function.
Use the undo igmp-snooping querier command to disable the IGMP snooping querier function.
By default, the IGMP snooping querier function is disabled.
Note that: This command takes effect only if IGMP snooping is enabled in the VLAN.
Related commands: igmp-snooping enable.
Examples
# Enable IGMP snooping and the IGMP snooping querier function in VLAN 2.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping querier
1-19