Startup Saved-Configuration - H3C S5120-SI Series Command Reference Manual

<Sysname> display startup
Current startup saved-configuration file: flash:/hmr.cfg
Next main startup saved-configuration file: flash:/aa.cfg
Next backup startup saved-configuration file: NULL
// The above information indicates that the main startup configuration file for the next system startup is
aa.cfg.
<Sysname> save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/aa.cfg]
(To leave the existing filename unchanged, press the enter key):startup.cfg
Validating file. Please wait............
Configuration is saved to device successfully.
<Sysname> display startup
Current startup saved-configuration file: flash:/hmr.cfg
Next main startup saved-configuration file: flash:/startup.cfg
Next backup startup saved-configuration file: NULL
// The above information indicates that the main startup configuration file for the next system startup is
changed to startup.cfg.

startup saved-configuration

Syntax
startup saved-configuration cfgfile [ backup | main ]
undo startup saved-configuration
View
User view
Default Level
2: System level
Parameters
cfgfile: Configuration file name. The file must be a file with an extension .cfg stored in the root directory
of the storage medium.
backup: Sets the configuration file as the backup startup configuration file that will be used at the next
startup of the device.
main: Sets the configuration file as the main startup configuration file that will be used at the next
startup of the device.
Description
Use the startup saved-configuration command to specify a startup configuration file (the
configuration file to be used at the next system startup).
Use the undo startup saved-configuration command to configure the system to start up with the null
configuration, that is, the factory configuration.
2-12