administrator-address
Syntax
administrator-address mac-address name cluster-name
undo administrator-address
View
Cluster view
Default Level
2: System level
Parameters
mac-address: MAC address of the management device (in hexadecimal form of H-H-H).
cluster-name: Name of an existing cluster, a string of 1 to 8 characters, which can only be letters,
numbers, subtraction sign (-), and underline (_).
Description
Use the administrator-address command to add a candidate device to a cluster.
Use the undo administrator-address command to remove a member device from the cluster.
By default, a device belongs to no cluster.
Note that:
The administrator-address command is applicable on candidate devices only, while the undo
administrator-address command is applicable on member devices only.
You are recommended to use the delete-member command on the management device to
remove a cluster member from a cluster.
Examples
# Remove a member device from the cluster on the member device.
<aaa_1.Sysname> system-view
[aaa_1.Sysname] cluster
[aaa_1.Sysname-cluster] undo administrator-address
auto-build
Syntax
auto-build [ recover ]
View
Cluster view
Default Level
2: System level
1-16