H3C S5120-SI Series Command Reference Manual page 52

Field
Multicast MAX-ratio
PVID
Mdi type
Port link-type
Tagged VLAN ID
Untagged VLAN ID
Peak value of input
Peak value of output
Last 300 seconds input: 0
packets/sec 0 bytes/sec
Last 300 seconds output: 0
packets/sec 0 bytes/sec
Input (total): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0
multicasts
Input (normal): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0
multicasts
input errors
runts
giants
throttles
CRC
frame
overruns
Multicast storm suppression ratio (the maximum ratio of
allowed number of multicast packets to overall traffic through an
interface)
Default VLAN ID
Cable type
Interface link type, which could be access, trunk, and hybrid.
VLANs whose packets are sent through the port with VLAN tag
kept
VLANs whose packets are sent through the port with VLAN tag
stripped off
Peak value of inbound traffic, in bytes/sec.
Peak value of outbound traffic, in bytes/sec.
Average rate of input and output traffic in the last 300 seconds,
in pps and Bps
Packet statistics on the inbound direction of the interface,
including the statistics of normal packets, and abnormal
packets, in packets and bytes
Number of unicast packets, broadcast packets, and multicast
packets on the inbound direction of the interface
Normal packet statistics on the inbound direction of the
interface, including the statistics of normal packets, in packets
and bytes
Number of unicast packets, broadcast packets, and multicast
packets on the inbound direction of the interface,
Input packets with errors
Frames received that were shorter than 64 bytes, yet in correct
formats, and contained valid CRCs
Frames received that were longer than the maximum frame
length supported on the interface:
For an Ethernet port that permits jumbo frames, giants refer
to frames that are longer than 10236 bytes (without VLAN
tags) or 10240 bytes (with VLAN tags).
For an Ethernet port that forbids jumbo frames, giants refer
to frames that are longer than 1536 bytes (without VLAN
tags) or 1540 bytes (with VLAN tags).
The number of times the receiver on the interface was disabled,
possibly because of buffer or CPU overload
Total number of packets received that had a normal length, but
contained checksum errors
Total number of frames that contained checksum errors and a
non-integer number of bytes
Number of times the receive rate of the interface exceeded the
capacity of the input queue, causing packets to be discarded
1-8
Description