Screen-Length Disable; System-View - H3C S5120-SI Series Command Reference Manual

screen-length disable

Syntax
screen-length disable
undo screen-length disable
View
User view
Default Level
1: Monitor level
Parameters
None
Description
Use the screen-length disable command to disable the multiple-screen output function of the current
user.
Use the undo screen-length disable command to enable the multiple-screen output function of the
current user.
By default, a login user uses the settings of the screen-length command. The default settings of the
screen-length command are: multiple-screen output is enabled and 24 lines are displayed on the next
screen. (For the details of the screen-length command, refer to Login Commands in the Command
Reference- Part 1- Login.)
Note that this command is applicable to the current user only and when a user re-logs in, the settings
restore to the system default.
Examples
# Disable multiple-screen output of the current user.
<Sysname> screen-length disable

system-view

Syntax
system-view
View
User view
Default Level
2: System level
Parameters
None
1-3