Authentication Lan-Access - H3C S5120-SI Series Command Reference Manual

Description
Use the authentication default command to configure the default authentication method for all types of
users.
Use the undo authentication default command to restore the default.
By default, the authentication method is local.
Note that:
The RADIUS scheme specified for the current ISP domain must have been configured.
The authentication method specified with the authentication default command is for all types of
users and has a priority lower than that for a specific access mode.
Related commands: authorization default, accounting default, radius scheme.
Examples
# Configure the default ISP domain system to use local authentication for all types of users.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] authentication default local
# Configure ISP domain test to use RADIUS authentication scheme rd for all types of users and use
local authentication as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication default radius-scheme rd local

authentication lan-access

Syntax
authentication lan-access { local | none | radius-scheme radius-scheme-name [ local ] }
undo authentication lan-access
View
ISP domain view
Default Level
2: System level
Parameters
local: Performs local authentication.
none: Does not perform any authentication.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which is a string of 1
to 32 characters.
Description
Use the authentication lan-access command to configure the authentication method for LAN access
users.
Use the undo authentication login command to restore the default.
1-7