H3C S5120-SI Series Command Reference Manual page 469

RecError_MSG_sum
SndMSG_Fail_sum
Timer_Err
Alloc_Mem_Err
State Mismatch
Other_Error
No-response-acct-stop packet
Discarded No-response-acct-stop packet for
buffer overflow
display stop-accounting-buffer
Syntax
display stop-accounting-buffer { radius-scheme radius-scheme-name | session-id session-id |
time-range start-time stop-time | user-name user-name }
View
Any view
Default Level
2: System level
Parameters
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which is a string of 1
to 32 characters.
session-id session-id: Specifies a session by its ID. The ID is a string of 1 to 50 characters.
time-range start-time stop-time: Specifies a time range by its start time and end time in the format of
hh:mm:ss-mm/dd/yyyy or hh:mm:ss-yyyy/mm/dd.
user-name user-name: Specifies a user by the username, which is a case-sensitive string of 1 to 80
characters. Whether the user-name argument should include the domain name depends on the setting
by the user-name-format command for the RADIUS scheme.
Description
Use the display stop-accounting-buffer command to display information about the stop-accounting
requests buffered in the device by scheme, session ID, time range, username, or slot.
Note that if receiving no response after sending a stop-accounting request to a RADIUS server, the
device buffers the request and retransmits it. You can use the retry stop-accounting command to set
the number of allowed transmission attempts.
Related commands:
user-name-format, retry stop-accounting.
Field
reset stop-accounting-buffer,
2-9
Description
Number of received packets in error
Number of packets that failed to be sent out
Number of timer errors
Number of memory errors
Number of errors for mismatching status
Number of errors of other types
Number of times that no response was received
for stop-accounting packets
Number of stop-accounting packets that were
buffered but then discarded due to full memory
stop-accounting-buffer enable,