H3C S5120-SI Series Command Reference Manual page 534

Related commands: display ssh server.
This command is only available to SSH users using SSH1 client software.
The system does not update any DSA key pair periodically.
Examples
# Set the RSA server key pair update interval to 3 hours.
<Sysname> system-view
[Sysname] ssh server rekey-interval 3
ssh user
Syntax
ssh user username service-type stelnet authentication-type { password | { any |
password-publickey | publickey } assign publickey keyname }
ssh user username service-type { all | sftp } authentication-type { password | { any |
password-publickey | publickey } assign publickey keyname work-directory directory-name }
undo ssh user username
View
System view
Default Level
2: System level
Parameters
username: SSH username, a case-sensitive string of 1 to 80 characters.
service-type: Specifies the service type of an SSH user, which can be one of the following:
all: Specifies both secure Telnet and secure FTP.
sftp: Specifies the service type as secure FTP.
stelnet: Specifies the service type of secure Telnet.
authentication-type: Specifies the authentication method of an SSH user, which can be one the
following:
password: Performs password authentication.
any: Performs either password authentication or publickey authentication.
password-publickey: Specifies that SSH2 clients perform both password authentication and
publickey authentication and that SSH1 clients perform either type of authentication.
publickey: Performs publickey authentication.
1-7