Info-Center Monitor Channel - H3C S5120-SI Series Command Reference Manual

The IP address of the specified source interface must be configured; otherwise, although the
info-center loghost source command can be configured successfully, the log host will not receive
any log information.
Examples
When the source IP address for log information is not specified, the status of interface GigabitEthernet
1/0/1 is up, and the log information in the following format is displayed on the log host:
<187>Jul 22 05:58:06 2008 Sysname %%10IFNET/3/LINK UPDOWN(l): GigabitEthernet1/0/1 link
status is UP.
# Specify the IP address of interface loopback 0 as the source IP address of log information.
<Sysname> system-view
[Sysname] interface loopback 0
[Sysname-LoopBack0] ip address 2.2.2.2 32
[Sysname-LoopBack0] quit
[Sysname] info-center loghost source loopback 0
After the above configuration, the status of interface GigabitEthernet 1/0/1 becomes up, and the log
information in the following format is displayed on the log host (compared with the format displayed
when the source IP address for log information is not specified, the following format has the
-DevIP=2.2.2.2 field which indicates the source IP address):
<187>Jul 22
GigabitEthernet1/0/1 link status is UP.

info-center monitor channel

Syntax
info-center monitor channel { channel-number | channel-name }
undo info-center monitor channel
View
System view
Default Level
2: System level
Parameters
channel-number: Specifies a channel number, in the range 0 to 9.
channel-name: Specifies a channel name, which could be a default name or a self-defined name. The
user needs to specify a channel name first before using it as a self-defined channel name. For more
information, refer to the info-center channel name command.
Description
Use the info-center monitor channel command to configure the channel to output system information
to the monitor.
Use the undo info-center monitor channel command to restore the default channel to output system
information to the monitor.
06:11:31 2008 Sysname %%10IFNET/3/LINK
1-18
UPDOWN(l):-DevIP=2.2.2.2;