H3C S5120-SI Series Command Reference Manual page 51

The Maximum Frame Length is 10240
Broadcast MAX-ratio: 100%
Unicast MAX-ratio: 100%
Multicast MAX-ratio: 100%
PVID: 1
Mdi type: auto
Port link-type: access
Tagged VLAN ID : none
Untagged VLAN ID : 1
Port priority: 0
Peak value of input: 0 bytes/sec, at 00-00-00 00:00:00
Peak value of output: 0 bytes/sec, at 00-00-00 00:00:00
Last 300 seconds input:
Last 300 seconds output:
Input (total): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts
Input (normal): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts
Input: 0 input errors, 0 runts, 0 giants, 0 throttles
0 CRC, 0 frame, 0 overruns, 0 aborts
0 ignored, 0 parity errors
Output (total): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Output (normal): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Output: 0 output errors, 0 underruns, 0 buffer failures
0 aborts, 0 deferred, 0 collisions, 0 late collisions
0 lost carrier, 0 no carrier
Table 1-2 display interface command output description
Field
GigabitEthernet1/0/1 current state
IP Packet Frame Type
Description
Unknown-speed mode
unknown-duplex mode
The Maximum Frame Length
Broadcast MAX-ratio
Unicast MAX-ratio
0 packets/sec 0 bytes/sec
0 packets/sec 0 bytes/sec
Current physical link state of the Ethernet port
Frame type of the Ethernet port
Description of the interface
Unknown-speed mode, in which mode speed is negotiated
between the current host and the peer.
Unknown-duplex mode, in which mode speed is negotiated
between the current host and the peer.
The maximum frame length allowed on an interface
Broadcast storm suppression ratio (the maximum ratio of
allowed number of broadcast packets to overall traffic through
an interface)
Unicast storm suppression ratio (the maximum ratio of allowed
number of unknown unicast packets to overall traffic over an
interface)
1-7
-%
-%
Description