Cluster-Snmp-Agent Community - H3C S5120-SI Series Command Reference Manual

Parameters
interval: Interval (in minutes) to send MAC address negotiation broadcast packets, which ranges from 0
to 30. If the interval is set to 0, the management device does not send broadcast packets to the member
devices.
Description
Use the cluster-mac syn-interval command to set the interval for a management device to send MAC
address negotiation broadcast packets for cluster management.
By default, the interval is set to one minute.
Note that this command can be executed on the management device only.
Examples
# Set the interval for the management device to send MAC address negotiation broadcast packets for
cluster management to two minutes on the management device.
<Sysname> system-view
[Sysname] cluster
[Sysname-cluster] ip-pool 10.1.1.1 24
[Sysname-cluster] build aaa
[aaa_0.Sysname-cluster] cluster-mac syn-interval 2

cluster-snmp-agent community

Syntax
cluster-snmp-agent community { read | write } community-name [ mib-view view-name ]
undo cluster-snmp-agent community community-name
View
Cluster view
Default Level
1: Monitor level
Parameters
read: Indicates to allow the community's read-only access to MIB objects. The community with
read-only authority can only query the device information.
write: Indicates to allow the community's read-write access to MIB objects. The community with
read-write authority can configure the device information.
community-name: Community name, which is a string of 1 to 26 characters.
view-name: MIB view name, which is a string of 1 to 32 characters.
Description
Use the cluster-snmp-agent community command to configure an SNMP community shared by a
cluster and set its access authority.
Use the undo cluster-snmp-agent community command to remove a specified community name.
Note that:
1-24