H3C S5120-SI Series Command Reference Manual page 94

Hide thumbs Also See for S5120-SI Series:
Table of Contents

Advertisement

Aggregation Mode: Dynamic
Loadsharing Type: Shar
System ID: 0x8000, 000f-e267-6c6a
Local:
Port
Status
-------------------------------------------------------------------------------
GE1/0/2
GE1/0/3
Remote:
Actor
Partner Priority Oper-Key
-------------------------------------------------------------------------------
GE1/0/2
GE1/0/3
Table 1-4 display link-aggregation verbose command output description
Field
Loadsharing Type
Port Status
Flags
Aggregation Interface
Aggregation Mode
System ID
Local
Port
Priority Oper-Key
S
32768
2
S
32768
2
S
32768
2
S
32768
2
Loadsharing type:
Shar for load sharing
NonS for non-load sharing
Port state: Selected or unselected.
One-octet LACP state flags field. From the least to the most
significant bit, they are represented by A through H as follows:
A indicates whether LACP is enabled. 1 for enabled and 0
for disabled.
B indicates the timeout control value. 1 for short timeout,
and 0 for long timeout.
C indicates whether the link is considered as aggregatable
by the sending system. 1 for true, and 0 for false.
D indicates whether the link is considered as synchronized
by the sending system. 1 for true, and 0 for false.
E indicates whether the sending system considers that
collection of incoming frames is enabled on the link. 1 for
true and 0 for false.
F indicates whether the sending system considers that
distribution of outgoing frames is enabled on the link. 1 for
true and 0 for false.
G indicates whether the receive state machine of the
sending system is using default operational partner
information. 1 for true and 0 for false.
H indicates whether the receive state machine of the
sending system is in the expired state. 1 for true and 0 for
false.
If a flag bit is set to 1, the corresponding English letter that
otherwise is not output is displayed.
Name of the aggregate interface
Mode of the aggregation group: Static for static aggregation,
and Dynamic for dynamic aggregation.
Local system ID, which comprises the system LACP priority
and the system MAC address.
Information about the local end
Port type and number
Flag
{ACDEF}
{ACDEF}
SystemID
{ACDEF}
{ACDEF}
Description
1-7
Flag

Advertisement

Table of Contents
loading

Table of Contents