Dhcp Select Relay - H3C S5120-SI Series Command Reference Manual

View
Interface view
Default Level
2: System level
Parameters
group-id: DHCP server group number to be correlated, in the range of 0 to 19.
Description
Use the dhcp relay server-select command to correlate specified interface(s) to a specified DHCP
server group.
Use the undo dhcp relay server-select command to remove a configured correlation.
By default, no DHCP server group is correlated with an interface on the relay agent.
Note that:
A DHCP server group can correlate with one or multiple DHCP relay agent interfaces.
A relay agent interface can only correlate with one DHCP server group, and a newly configured
correlation overwrites the previous one. If the server group in the new correlation does not exist,
the new configuration will not work. The interface still maintains the previous correlation.
The DHCP server group referenced in this command should have been configured by using the
dhcp relay server-group command.
Related commands: dhcp relay server-group, display dhcp relay.
Examples
# Correlate VLAN-interface 1 to DHCP server group 1.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] dhcp relay server-select 1

dhcp select relay

Syntax
dhcp select relay
undo dhcp select relay
View
Interface view
Default Level
2: System level
Parameters
None
1-12