Build - H3C S5120-SI Series Command Reference Manual

Examples
# Delete a device with the MAC address of 0EC0-FC00-0001 from the blacklist on the management
device.
<aaa_0.Sysname> system-view
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster] black-list delete-mac 0ec0-fc00-0001
# Delete all devices in the blacklist on the management device.
[aaa_0.Sysname-cluster] black-list delete-mac all

build

Syntax
build cluster-name
undo build
View
Cluster view
Default Level
2: System level
Parameters
cluster-name: Cluster name, a string of 1 to 8 characters, which can only be letters, numbers,
subtraction sign (-), and underline (_).
Description
Use the build command to configure the current device as the management device and specify a name
for it.
Use the undo build command to configure the current management device as a candidate device.
By default, the device is not a management device.
Note that:
When executing this command, you will be asked whether to create a standard topology map or
not.
This command can only be applied to devices that are capable of being a management device and
are not members of other clusters. The command takes no effect if you execute the command on a
device which is already a member of another cluster. If you execute this command on a
management device, you will replace the cluster name with the one you specify.
The member number of the management device is 0.
Examples
# Configure the current device as a management device and specify the cluster name as aaa.
<Sysname> system-view
[Sysname] cluster
[Sysname-cluster] build aaa
[Sysname-cluster] ip-pool 172.16.0.1 255.255.255.248
1-19