H3C S5120-SI Series Command Reference Manual page 814

View
System view
Default Level
2: System level
Parameters
None
Description
Use the cluster enable command to enable the cluster function.
Use the undo cluster enable command to disable the cluster function.
By default, the cluster function is enabled.
Note that:
When you execute the undo cluster enable command on a management device, you remove the
cluster and its members, and the device stops operating as a management device.
When you execute the undo cluster enable command on a member device, you disable the
cluster function on the device, and the device leaves the cluster.
When you execute the undo cluster enable command on a device that belongs to no cluster, you
disable the cluster function on the device.
Examples
# Enable the cluster function.
<Sysname> system-view
[Sysname] cluster enable
cluster switch-to
Syntax
cluster switch-to { member-number | mac-address mac-address | administrator | sysname
member-sysname }
View
User view
Default Level
0: Visit level
Parameters
member-number: Number of a member device in a cluster, which ranges from 1 to 255.
mac-address mac-address: MAC address of a member device, which is in the format of H-H-H.
administrator: Switches from a member device to the management device.
sysname member-sysname: System name of a member device, which is a string of 1 to 32 characters.
1-21