H3C S5120-SI Series Command Reference Manual page 216

Description
Use the display fib command to display FIB entries. If no parameters are specified, all FIB entries will
be displayed.
Examples
# Display all FIB entries.
<Sysname> display fib
Destination count: 4
Flag:
U:Useable
R:Relay
Destination/Mask
10.2.0.0/16
10.2.1.1/32
127.0.0.0/8
127.0.0.1/32
# Display FIB information passing ACL 2000.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule permit source 10.2.0.0 0.0.255.255
[Sysname-acl-basic-2000] display fib acl 2000
Destination count: 2
Flag:
U:Useable
R:Relay
Destination/Mask
10.2.0.0/16
10.2.1.1/32
# Display all entries that contain the string 127 and start from the first one.
<Sysname> display fib | begin 127
Flag:
U:Useable
R:Relay
Destination/Mask
10.2.1.1/32
127.0.0.0/8
127.0.0.1/32
FIB entry count: 4
G:Gateway H:Host
Nexthop Flag
10.2.1.1 U
127.0.0.1 UH
127.0.0.1 U
127.0.0.1 UH
FIB entry count: 2
G:Gateway H:Host
Nexthop Flag
10.2.1.1 U
127.0.0.1 UH
G:Gateway H:Host
Nexthop Flag
127.0.0.1 UH
127.0.0.1 U
127.0.0.1 UH
B:Blackhole D:Dynamic
OutInterface InnerLabel Token
Vlan1 Null
InLoop0 Null
InLoop0 Null
InLoop0 Null
B:Blackhole D:Dynamic
OutInterface InnerLabel Token
Vlan1 Null
InLoop0 Null
B:Blackhole D:Dynamic
OutInterface InnerLabel Token
InLoop0 Null
InLoop0 Null
InLoop0 Null
1-2
S:Static
Invalid
Invalid
Invalid
Invalid
S:Static
Invalid
Invalid
S:Static
Invalid
Invalid
Invalid