Escape-Key - H3C S5120-SI Series Command Reference Manual

Field
LinkCount
LoginTime
LastTime

escape-key

Syntax
escape-key { default | character }
undo escape-key
View
User interface view
Default Level
3: Manage level
Parameters
default: Restores the default escape key combination <Ctrl + C>.
character: Specifies the shortcut key for aborting a task, a single character (or its corresponding ASCII
code value in the range 0 to 127) or a string of 1 to 3 characters.
Description
Use the escape-key command to define a shortcut key for aborting tasks.
Use the undo escape-key command to restore the default shortcut key.
You can use a single character (or its corresponding ASCII code value in the range 0 to 127) or a string
of 1 to 3 characters to define a shortcut key. But in fact, only the first character functions as the shortcut
key. For example, if you enter an ASCII value 113, the system will use its corresponding character <q>
as the shortcut key; if you input the string q@c, the system will use the first letter <q> as the shortcut
key.
By default, you can use <Ctrl + C> to terminate a task. You can use the display current-configuration
command to verify the shortcut key you have defined.
Examples
# Define <Q> as the escape key.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] escape-key Q
To verify the configuration, do the following:
# Run the ping command to test the connection.
<Sysname> ping –c 20 125.241.23.46
PING 125.241.23.46: 56
Number of tasks that the web user runs
Time when the web user logged in
Last time when the web user accessed the switch
data bytes, press Q to break
1-9
Description