H3C S5120-SI Series Command Reference Manual page 803

View
Any view
Default Level
1: Monitor level
Parameters
mac-address: MAC address of the device, in the format of H-H-H.
Description
Use the display ntdp single-device mac-address command to view the detailed NTDP information of
a specified device.
Examples
# Display the detailed NTDP information of the device with a MAC address of 00E0-FC00-5111.
<Sysname> display ntdp single-device mac-address 00e0-fc00-5111
Hostname : aaa_1.42-com2
MAC : 00e0-fc00-5111
Hop : 1
Device : S5120
IP : 16.168.1.2/24
Version :
H3C Comware Platform Software
Comware Software, Version 5.20, Alpha 1101
Copyright (c) 2004-2009 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
H3C S5120
Cluster : Member switch of cluster aaa , Administrator MAC: 00e0-fc00-5175
Peer MAC
00e0-fc00-5175
00e0-fc00-5175
Table 1-4 display ntdp device-list command output description
Field
Hostname
MAC
Hop
Device
IP
Version
Peer Port ID
GigabitEthernet1/0/1
GigabitEthernet1/0/5
System name of the device
MAC address of the device
Hops from the current device to the device that collect topology
information
Device model
IP address and subnet mask length of the management VLAN
interface on the device
Version information
Native Port ID
GigabitEthernet1/0/1
GigabitEthernet1/0/7
Description
1-10
Speed Duplex
100 FULL
100 FULL