Snmp; Configuring Snmp V1 And Snmp V2 - H3C MSR 900 Series Quick Start Manual

You can choose to check whether the current configuration has been
saved to the configuration file to be used at the next startup.
If you select the checkbox before "Check whether the current
configuration is saved in the next startup configuration file",
the system will check the configuration before rebooting the
device. If the check succeeds, the system reboots the device; if
the check fails, the system pops up a prompt to inform that the
current configuration file and the saved configuration file are
inconsistent. As a result, the system will not reboot the device. In
this case, you need to save the current configuration manually
before you can reboot the device.
If you do not select the checkbox, the system reboots the device
directly.

SNMP

Simple Network
communication rules between a management device and the
managed devices on the network. SNMP enables network
administrators to search and modify information, locate and diagnose
network problems, plan for network growth, and generate reports on
network nodes.
Currently, there are three SNMP versions, SNMP v1, SNMP v2, and
SNMP v3.

Configuring SNMP v1 and SNMP v2

Select System Management > SNMP from the navigation tree to
enter the page shown in Figure 4-7.
Management Protocol
4-6
(SNMP) offers the