Header - H3C S5120-SI Series Command Reference Manual

H3C S5120-52P-SI uptime is 0 week, 0 day, 0 hour, 50 minutes
H3C S5120-52P-SI
128M bytes DRAM
128M bytes Nand Flash Memory
Config Register points to Nand Flash
Hardware Version is REV.B
CPLD Version is 001
Bootrom Version is 119
[SubSlot 0] 48GE+4SFP Hardware Version is REV.B

header

Syntax
header { incoming | legal | login | motd | shell } text
undo header { incoming | legal | login | motd | shell }
View
System view
Default Level
2: System level
Parameters
incoming: Sets the banner displayed when a Modem login user enters user view. If authentication is
needed, the incoming banner is displayed after the authentication is passed.
legal: Sets the authorization banner before a user logs onto the terminal interface. The legal banner is
displayed before the user inputs the username and password.
login: Sets the login banner at authentication.
motd: Banner displayed before login. If authentication is required, the banner is displayed before
authentication.
shell: Sets the banner displayed when a non Modem login user enters user view.
text: Banner message, which can be input in two formats. Refer to Basic System Configuration for the
detailed information.
Description
Use the header command to create a banner.
Use the undo header command to clear a banner.
Examples
# Configure banners.
<Sysname> system-view
[Sysname] header incoming %
Please input banner content, and quit with the character '%'.
1-15