Display Ssl Server-Policy - H3C S5120-SI Series Command Reference Manual

Table 1-1 display ssl client-policy command output description
Field
SSL Client Policy
SSL Version
PKI Domain
Prefer Ciphersuite

display ssl server-policy

Syntax
display ssl server-policy { policy-name | all }
View
Any view
Default Level
1: Monitor level
Parameters
policy-name: SSL server policy name, a case-insensitive string of 1 to 16 characters.
all: Displays information about all SSL server policies.
Description
Use the display ssl server-policy command to view information about a specified or all SSL server
policies.
Examples
# Display information about SSL server policy policy1.
<Sysname> display ssl server-policy policy1
SSL Server Policy: policy1
PKI Domain: domain1
Ciphersuite:
RSA_RC4_128_MD5
RSA_RC4_128_SHA
RSA_DES_CBC_SHA
RSA_AES_128_CBC_SHA
Handshake Timeout: 3600
Close-mode: wait disabled
Session Timeout: 3600
Session Cachesize: 500
Client-verify: disabled
SSL client policy name
Version of the protocol used by the SSL client policy, SSL 3.0 or TLS 1.0.
PKI domain of the SSL client policy
Preferred cipher suite of the SSL client policy
1-4
Description