Poe Update - H3C S5120-SI Series Command Reference Manual

If a PoE configuration file is applied to a PoE interface, you need to remove the application of the
file to the PoE interface before configuring the interface in PoE interface view.
If two PoE interfaces have the same priority level, the PoE interface with a smaller ID has the
higher priority level.
Examples
# Set the power priority of GigabitEthernet 1/0/1 to critical.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] poe priority critical
# Set the power priority of GigabitEthernet 1/0/1 to critical through a PoE configuration file.
<Sysname> system-view
[Sysname] poe-profile abc
[Sysname-poe-profile-abc-1] poe priority critical
[Sysname-poe-profile-abc-1] quit
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] apply poe-profile name abc

poe update

Syntax
poe update { full | refresh } filename
View
System view
Default Level
2: System level
Parameters
full: Specifies to upgrade the PSE processing software in full mode when the software is unavailable.
refresh: Specifies to upgrade the PSE processing software in refresh mode when the software is
available.
filename: Name of the upgrade file, a string of 1 to 64 characters. This file must be under the root
directory of the file system of the device. The extension of the upgrade file varies with devices.
Description
Use the poe update command to upgrade the PSE processing software online.
1-16