H3C S5120-SI Series Command Reference Manual page 624

local mode: client, local poll: 6
peer mode: server, peer poll: 6
offset: 0.0000 ms,delay: 0.00 ms,
root delay: 0.00 ms, root disper: 10.00 ms
reach: 1, sync dist: 0.010, sync state: 2
precision: 2^18, version: 3, peer interface: InLoopBack0
reftime: 10:56:22.442 UTC Aug 7 2009(CE2686D6.71484513)
orgtime: 10:56:22.442 UTC Aug 7 2009(CE2686D6.71484513)
rcvtime: 10:56:22.442 UTC Aug 7 2009(CE2686D6.7149E881)
xmttime: 10:56:22.442 UTC Aug 7 2009(CE2686D6.71464DC2)
filter delay : 0.00
filter offset: 0.00
filter disper: 0.00
Total associations : 1
Table 1-2 display ntp-service sessions verbose command output description
Field
clock source
clock stratum
clock status
disper: 0.02 ms
0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00
IP address of the clock source
Stratum level of the clock source, which determines the clock
precision. The value range is 1 to 16. The clock precision
decreases from stratum 1 to stratum 16. A stratum 1 clock
has the highest precision, and a stratum 16 clock is not
synchronized.
Status of the clock source corresponding to this session,
including
configured: The session was created by a configuration
command.
dynamic: This session is established dynamically.
master: The clock source is the primary reference source
of the current system.
selected: The clock source has survived the clock
selection algorithm.
candidate: The clock source is the candidate reference
source.
sane: The clock
authentication.
insane:
authentication.
valid: The clock source is valid, which means the clock
source meet the following requirements: it has passed the
authentication and is being synchronized; its stratum level
is valid; its root delay and root dispersion values are within
their ranges.
invalid: The clock source is invalid.
unsynced: The clock source has not been synchronized
or the value of the stratum level is invalid.
1-3
0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00
Description
source has
The clock source
0.00
0.00
0.00
passed the sane
has failed the sane