H3C S5120-SI Series Command Reference Manual page 465

Primary Acct Server:
IP: 1.1.1.1
Second Auth Server:
IP: N/A
Second Acct Server:
IP: N/A
Auth Server Encryption Key : 123
Acct Server Encryption Key : Not configured
Accounting-On packet disable, send times : 5 , interval : 3s
Interval for timeout(second)
Retransmission times for timeout
Interval for realtime accounting(minute)
Retransmission times of realtime-accounting packet
Retransmission times of stop-accounting packet
Quiet-interval(min)
Username format
Data flow unit
Packet unit
nas-ip address
------------------------------------------------------------------
Total 1 RADIUS scheme(s).
Table 2-1 display radius scheme command output description
Field
SchemeName
Index
Type
Primary Auth Server
Primary Acct Server
Second Auth Server
Second Acct Server
IP
Port
State
Auth Server Encryption Key
Acct Server Encryption Key
Accounting-On packet disable
send times
interval
Interval for timeout(second)
Port: 1813
Port: 1812
Port: 1813
: 3
: 3
: 12
: 5
: 500
: 5
: without-domain
: Byte
: one
: 1.1.1.1
Name of the RADIUS scheme
Index number of the RADIUS scheme
Type of the RADIUS server
Primary authentication server
Primary accounting server
Secondary authentication server
Secondary accounting server
IP address of the server. N/A means not
configured.
Service port of the server. If no port configuration
is performed, the default port number is
displayed.
Status of the server, active or block.
Shared key of the authentication server
Shared key of the accounting server
The accounting-on feature is disabled
Retransmission times of accounting-on packets
Interval to retransmit accounting-on packets
Timeout time in seconds
2-5
State: block
State: block
State: block
Description