Retry Stop-Accounting (Radius Scheme View); Secondary Accounting (Radius Scheme View) - H3C S5120-SI Series Command Reference Manual

retry stop-accounting (RADIUS scheme view)

Syntax
retry stop-accounting retry-times
undo retry stop-accounting
View
RADIUS scheme view
Default Level
2: System level
Parameters
retry-times: Maximum number of stop-accounting request transmission attempts. It ranges from 10 to
65,535 and defaults to 500.
Description
Use the retry stop-accounting command to set the maximum number of stop-accounting request
transmission attempts.
Use the undo retry stop-accounting command to restore the default.
Suppose that the RADIUS server response timeout period is 3 seconds (set with the timer
response-timeout command), the timeout retransmission attempts is 5 (set with the retry command),
and the maximum number of stop-accounting request transmission attempts is 20 (set with the retry
stop-accounting command). This means that for each stop-accounting request, if the device receives
no response within 3 seconds, it will initiate a new request. If still no responses are received within 5
renewed requests, the stop-accounting request is deemed unsuccessful. Then the device will
temporarily store the request in the device and resend a request and repeat the whole process
described above. Only when 20 consecutive attempts fail will the device discard the request.
Related commands:
stop-accounting-buffer.
Examples
# Set the maximum number of stop-accounting request transmission attempts to 1,000 for RADIUS
scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] retry stop-accounting 1000

secondary accounting (RADIUS scheme view)

Syntax
secondary accounting ip-address [ port-number ]
undo secondary accounting
reset stop-accounting-buffer,
2-20
radius scheme, display